Tile and Grout Cleaning , Why Does It Get Dirty?

Tile and Grout Cleaning

tile and grout cleaningTile and Grout Cleaning , Why does it get dirty? Tile and grout is basically a smooth surface with little trenches that surround each tile. The trenches are a type of concrete which makes them porous and should be sealed.

Your normal everyday cleaning of the tile and grout usually consists of sweeping and mopping. This is effective, but over time what you are sweeping and mopping is getting left behind in the trenches. It will even pull extra dirt off the mop to leave it in the grout lines. this adds water to the soil that is left behind and it forms into a tougher soil to remove. The soil could be anything from dirt to grease. tile and grout cleaning works to break up this soil and suck it away. Leaving a cleaner looking grout line.

Smart Choice Cleaning has the right state of the art equipment and cleaners to take on these dirty grout lines. We have the knowledge and expertise to clean them and bring them back to their former glory. Clients of ours that have had their tile and grout cleaned were amazed and said they had forgotten that their grout lines were that color.

When you purchased your tile and grout floor , you probably picked out the color of the grout as well. You did this for a reason. You like the color grout that went together with the floor. Seeing that again could just make you love the floor again.

Every tile and grout floor is going to get dirty even with normal everyday cleaning. It is normal and expected. It needs the special cleaning that Smart Choice Cleaning offers to take away the dirt on a regular basis. A regular basis depends on your floor the foot traffic and other factors. On average a tile and grout floor needs a good cleaning every 12-18 months.

Make you and your tile and grout floor happy.

Call Today

440-721-7216

Check us out on  Angie’s List

 

 

Fatal error: Uncaught exception 'wfWAFStorageFileException' with message 'Unable to save temporary file for atomic writing.' in /home/smartcc/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php:29 Stack trace: #0 /home/smartcc/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php(567): wfWAFStorageFile::atomicFilePutContents('/home/smartcc/p...', '<?php exit('Acc...') #1 [internal function]: wfWAFStorageFile->saveConfig() #2 {main} thrown in /home/smartcc/public_html/wp-content/plugins/wordfence/vendor/wordfence/wf-waf/src/lib/storage/file.php on line 29